efa tenant update
Allows changes to be made to a tenant
after it has been created.
Syntax
efa tenant update
[
--name
tenant-name
|
--description
tenant-description
|
--l2-vni-range
range
|
--l3-vni-range
range
|
--vlan-range
range
|
--vrf-count
number
|
--enable-bd
|--operation
{
desc-update | vni-update
| port-add | port-delete | vlan-add | vlan-delete | vlan-update |
num-vrf-update | enable-bd-update| mirror-destination-port-add |
mirror-destination-port-delete
}
|--port
port-list |
--force
|
--port
value
|
--mirror-destination-port
value
]
Parameters
- --name
tenant-name
- Specifies name of tenant.
- --description
tenant-description
- Describes the tenant.
- --l2-vni-range
range
- Specifies the contiguous range of Layer 2
VNIs in ascending order that are reserved for the tenant within the scope of
a fabric.
- --l3-vni-range
range
- Specifies the contiguous Range of L3 VNIs in
ascending order will be reserved for the tenant within the scope of a
fabric.
- --vlan-range
range
- Specifies the range of VLANs to be reserved
for the tenant.
- --vrf-count int
number
- Specifies the number of VRFs to be reserved
for the tenant.
- --enable-bd
- Enables BD capability for networks created under this tenant.
- --operation
{
desc-update |
vni-update | port-add | port-delete | vlan-add | vlan-delete |
vlan-update | num-vrf-update | enable-bd-update |
mirror-destination-port-add |
mirror-destination-port-delete
}
- Specifies operation code.
- --port
value
- Lists physical ports of devices which will be reserved for the asset.
Example: SW1_IP[0/1],SW2_IP[0/5]
-
--mirror-destination-port
value
-
List of
physical ports of devices which will be reserved as mirror
destination ports. Example:
SW1_IP[0/1,0/2,0/12-15,0/5:4],SW2_IP[0/1,0/4,0/5:1-2,0/5:3,0/9-20].
- --force
- Forces the deletion on the tenant if the
option is provided.
Examples
This example removes a VLAN range from the
tenant.
$ efa tenant update --name tenant21 --operation vlan-delete
--vlan-range 201-300
Tenant updated successfully.
This example adds a port to an existing
tenant.
$ efa tenant update --name tenant21 --operation port-add
--port 10.20.216.15[0/29]
Tenant updated successfully.
